2-Stage (Dual Stage) Whole House Water Filtration System, 3/4″ Port Inlet/Outlet, Semiclear Housing, with an Extra Set of Replacement cartridges, SKU: MWC-DUAL-CH34

$79.00

Description

 

Whole-home sediment and carbon filtration

Dual-stage filtration with semi-clear housings and one complete spare filter set

This point-of-entry system installs on the home’s main cold-water line and filters water before it reaches connected faucets, showers and appliances. It uses standard 10″ × 2.5″ slim cartridges and includes one filter set preinstalled plus one complete replacement set.

2 stagesSediment + carbon block
3/4″ NPTInlet and outlet
10″ × 2.5″Standard slim cartridges
2 sets total1 installed + 1 spare

What it does

Two filtration stages support practical whole-house water treatment

Water passes through a sediment prefilter first, followed by a premium activated carbon block for chlorine-related taste and odor.

Installed where the main water supply enters the home, the system helps capture suspended particles and improve chlorine-related water quality before water is distributed through the plumbing.

Stage 01

Sediment Prefilter

Helps capture dirt, sand, silt, visible rust particles and other suspended debris while protecting the carbon stage downstream.

Stage 02

Premium Activated Carbon Block

Helps reduce chlorine, unpleasant taste and odor, and many common organic compounds while providing final water polishing.

Key benefits

Simple two-stage treatment with visible housings and replacement value

01

Point-of-entry filtration
Filters water for connected faucets, showers, laundry and appliances from one central location.

02

Two-stage treatment
Sediment filtration protects the downstream carbon block and supports consistent household use.

SC

Semi-clear housings
Visible sumps make it easier to monitor sediment buildup and general cartridge condition.

2X

Two complete filter sets
One set is preinstalled and one complete spare set is included—four cartridges total.

3/4

Common plumbing connection
3/4″ threaded inlet and outlet ports suit many residential main-water installations.

W

Housing wrench included
The supplied wrench helps open the housings during routine cartridge replacement.

Reduction guide

What the included filters help reduce—and what requires other treatment

The sediment and activated-carbon combination is intended for suspended particles and chlorine-related concerns. Other water conditions may require specialty treatment.

Helps reduce with the included filter set

Sediment
Dirt and silt
Sand
Visible rust particles
Suspended debris
Chlorine
Unpleasant taste
Unpleasant odor
Many common VOCs
Particle-related cloudiness

Actual reduction and cartridge life depend on source-water chemistry, pressure, flow rate, household use and filter condition.

Not designed to remove without specialty treatment

Hardness minerals
Dissolved scale
Dissolved iron
Fluoride
Chloramine
Bacteria or unsafe water
Dissolved salts / TDS

Chloramine generally requires catalytic carbon; hardness usually requires a water softener; microbiological concerns require appropriate disinfection; dissolved contaminants may require specialty media or reverse osmosis.

Product details

Specifications and package contents

Application Point-of-entry whole-house cold-water filtration
Number of stages 2: sediment + premium activated carbon block
Inlet / outlet 3/4″ threaded ports
Cartridge size Standard 10″ × 2.5″ slim cartridges
Housing style Semi-clear slim housings on a dual metal bracket
Working pressure 20–80 PSI
Water temperature 40–100°F; cold water only
Typical filter replacement Approximately every 3–6 months, depending on source-water quality, household use and pressure loss
Listed shipping dimensions 16 × 10 × 8 in
Listed shipping weight Approximately 160 oz / 10 lb
SKU MWC-DUAL-CH34

What is included inside the package

  • Dual-stage whole-house filtration system with two semi-clear housings and metal mounting bracket
  • One preinstalled filter set: sediment + premium activated carbon block
  • One complete spare filter set—2 additional cartridges
  • Four cartridges total: 2 installed + 2 spare
  • Filter housing wrench
Installation and filter-change manual
Review installation, flushing, cartridge replacement and leak-check instructions before use.
Download Manual (PDF)

Maintenance and compatibility

Compatible replacement filters and service parts

Use compatible standard 10″ × 2.5″ slim cartridges and service parts intended for MyAquaFilter 3/4″ whole-house housings.

2F

Premium Dual-Stage Replacement Set

One sediment cartridge and one premium activated carbon block for a complete filter-change cycle.

View replacement set →

H

Clear 3/4″ Replacement Housing

Replacement housing for compatible standard 10″ × 2.5″ cartridges and 3/4″ dual- or triple-stage systems.

View housing →

W

Slim Housing Wrench

Replacement wrench for compatible standard 10″ × 2.5″ slim whole-house filter housings.

View wrench →

O

3/4″ Housing O-Ring

Replacement gasket for compatible clear or blue 3/4″ slim whole-house filter housings.

View O-ring →

Before purchase and installation

Good to know

!
This is not a water softener
Sediment and carbon filters do not remove dissolved hardness minerals or prevent all mineral scale.

!
Check whether your city uses chloramine
The included standard carbon block is intended primarily for chlorine. Chloramine generally requires catalytic carbon.

!
Confirm 3/4″ plumbing compatibility
Adapters or reducers may be required when the home’s main line uses a different connection size.

!
Professional installation is recommended
Use a licensed plumber and follow local plumbing and building codes. Confirm flow direction before connecting the system.

!
Protect the housings and leave service clearance
Install away from freezing conditions and direct sunlight, with enough clearance below both housings for cartridge replacement.

!
Flush and inspect after installation or service
Flush the new carbon filter, pressurize the system slowly, and inspect all housings and fittings for leaks immediately and again during the next 12 hours.

Filter life and reduction performance vary with water chemistry, sediment load, pressure, flow rate and household usage. This system is not intended to make microbiologically unsafe or unknown-quality water safe to drink. Test private-well or unknown water and select treatment based on the results.
Not sure whether this filter combination matches your water?
Send your ZIP code, water source—municipal or well—and any recent water-test results.

Ask a Water Filter Specialist

Additional information

Weight 160 oz
Dimensions 16 × 10 × 8 in
Port size

3/4"

Housing type

Semiclear

Reviews

There are no reviews yet.


Be the first to review “2-Stage (Dual Stage) Whole House Water Filtration System, 3/4″ Port Inlet/Outlet, Semiclear Housing, with an Extra Set of Replacement cartridges, SKU: MWC-DUAL-CH34”

Related Products

Featured Products