5-Micron Sediment
Helps capture dirt, sand, silt, visible rust particles and suspended scale debris while helping protect the carbon cartridges and downstream equipment.
No sales tax collected outside of California • Free U.S. shipping on orders over $75 • Phone: (858) 252-3344
$20.00
Reorder codes: 3UF24 · B07L4GXJXP
This three-cartridge set replaces the standard prefilter sequence in compatible systems using 10″ × 2.5″ slim housings. Install the filters in order to capture suspended particles, support chlorine reduction and provide final taste-and-odor polishing.
Use as a complete replacement cycle in compatible three-stage whole-house systems or as the three prefilters in compatible under-sink reverse-osmosis systems.
Helps capture dirt, sand, silt, visible rust particles and suspended scale debris while helping protect the carbon cartridges and downstream equipment.
Helps reduce chlorine, unpleasant taste and odor, and many common organic compounds while supporting practical flow through slim housings.
Provides final carbon polishing to help further reduce chlorine-related taste and odor before water enters the next treatment stage or household plumbing.
The three media types address suspended particles and chlorine-related water-quality concerns. Actual performance depends on source water and operating conditions.
Actual reduction and cartridge life depend on water chemistry, sediment load, pressure, flow rate, household use and filter condition.
Chloramine generally requires catalytic carbon; hardness usually requires a softener; microbiological concerns require suitable disinfection; dissolved contaminants may require specialty media or reverse osmosis.
| Product type | Universal three-cartridge replacement set |
|---|---|
| Compatible applications | Compatible three-stage whole-house systems and under-sink RO prefilter housings |
| Number of cartridges | 3 |
| Cartridge format | Standard 10″ × 2.5″ slim; carbon cartridges approximately 9 3/4″ long |
| Stage sequence | Sediment → GAC → CTO carbon block |
| Sediment rating | 5 micron nominal |
| CTO rating | 10 micron nominal |
| Sediment capacity | Approximately 3–12 months, depending on sediment load and use |
| GAC capacity | Listed up to 1,800 gallons |
| CTO capacity | Listed up to 1,000 gallons or approximately 3–12 months |
| Operating temperature | 36–100°F; cold water only |
| Listed maximum pressure | Up to 100 PSI at cartridge level; follow the lower limit of the installed housing or system |
| Reorder codes | 3UF24 · B07L4GXJXP |
| Listed shipping dimensions | 11 × 8 × 3 in |
| Listed shipping weight | Approximately 40 oz / 2.5 lb |
Confirm cartridge size and stage order before purchase. In an RO system, these are prefilters only and do not replace the RO membrane, postfilter, remineralization filter or DI cartridge.
Three-Stage Whole-House Systems
Fits many compatible three-stage systems that use standard slim 10″ × 2.5″ housings.
Under-Sink RO Prefilter Housings
May replace the sediment, GAC and CTO prefilters in compatible under-sink RO systems using standard drop-in housings.
Individual Sediment Filter
Replace the first-stage cartridge separately when sediment loading occurs sooner than carbon exhaustion.
Individual Carbon Filters
GAC and CTO cartridges are also available separately for systems with different replacement schedules.
| Weight | 40 oz |
|---|---|
| Dimensions | 11 × 8 × 3 in |
| Brands | Aqua |
T.B. –
Perfect fit