Automatic Shut-Off Valve for Under-Sink RO Systems — 1/4″ OD Quick-Connect — SKU FT-ASO

$5.99

Universal AutoShut Off Valve for Undersink Reverse Osmosis Systems with Quick Connect, for 1/4″ OD tubing. SKU# AUTOSHUTOFFVALVE

Description

RO installation & control accessory

Automatically stop feed-water flow after a selected 15–120 minute interval

This fully mechanical inline timer is designed for compatible countertop RO systems and other water-line setups that use 3/8″ OD tubing. Set the dial for a selected interval from 15 to 120 minutes and the timer mechanically closes the water supply when the time expires. No batteries or electrical connection are required.

15–120 minAdjustable shut-off
3/8″ ODTubing adapters included
MechanicalNo batteries or power
SKU TIMER-QC38MyAquaFilter SKU

Key benefits

Purpose-built hardware for compatible reverse-osmosis systems

TIME

Timed Shut-OffStops feed-water flow after the selected interval.

3/8

3/8″ SystemsConfigured for compatible 3/8″ OD tubing setups.

NO

No ElectricitySpring-driven mechanical operation.

KIT

Adapter KitIncludes timer, 3/4″ nipple, and two 3/4″ × 3/8″ adapters.

Specifications

Product details

Product type Mechanical inline water shut-off timer kit
Timer model Orbit 62034
Timer range 15–120 minutes
Power None — fully mechanical
Tubing connection 3/8″ OD via included adapters
Included 1 timer + 1 × 3/4″ × 3/4″ nipple + 2 × 3/4″ × 3/8″ adapters
Compatibility Compatible 3/8″ OD water-line setups
MyAquaFilter countertop RO compatibility Not compatible with standard MyAquaFilter countertop RO systems using 1/4″ OD tubing
Listed shipping dimensions 6 × 3 × 2 in
Listed shipping weight 8 oz
SKU TIMER-QC38

Before installation

  • Confirm tubing, drain-pipe, or system configuration before ordering
  • Shut off water and depressurize the RO system before service
  • Restore water gradually and inspect the installation for proper operation

Installation & use

Match the component to the RO system before installation

1

Verify Compatibility

Compare the existing tubing size, drain pipe, or RO plumbing layout with the specifications above.

2

Install Carefully

Follow the connection method required for the component and avoid forcing plastic parts or tubing.

3

Test Operation

Restore water and confirm the valve, timer, or drain connection functions correctly without leakage.

Good to know

RO control parts are system-specific

!
Verify tubing size1/4″ and 3/8″ OD components are not interchangeable.
!
Check system designTank-based, tankless, countertop, and drain-line configurations can require different parts.
Source correction: the current page says the included 3/4″ × 3/8″ adapters are “for 1/4″ OD tubing.” That parenthetical is inconsistent with the 3/8″ product and adapter size and should be removed. Use this timer as a convenience shut-off device, not as certified flood-prevention equipment.
Not sure this is the correct RO part?Send your system model and a clear photo of the existing tubing or connection.

Ask a Water Filter Specialist

Additional information

Weight 8 oz
Dimensions 3 × 3 × 2 in

1 review for Automatic Shut-Off Valve for Under-Sink RO Systems — 1/4″ OD Quick-Connect — SKU FT-ASO

  1. 5 out of 5

    Daniel

    Bought as replacement


Add a review

Related Products

Featured Products