Countertop RO
Faster Tankless Production
Well suited to compatible countertop RO systems where purified water is collected directly rather than stored in a pressure tank.
150 GPD RO Reverse Osmosis Membrane — 2012 TFC/TW Type for Countertop & Under-Sink Systems — SKU TW-2012-150
$26.90
- Description
- Additional information
- Reviews (1)
Description
150 GPD high-output residential RO membrane
2012 TFC/TW membrane for compatible countertop and under-sink reverse-osmosis systems
This 150 GPD thin-film composite reverse-osmosis membrane is designed for compatible residential RO systems that need faster purified-water production. It is well suited to countertop RO systems without storage tanks and to under-sink systems with higher daily water demand.
150 GPDRated membrane capacity
2012 sizeApprox. 2.0″ × 12″ membrane
TFC / TWTap-water residential RO membrane
SKU ULP-2012-150MyAquaFilter catalog SKU
Application
Faster production for higher daily drinking-water demand
A 150 GPD membrane provides more rated output than 50, 75, or 100 GPD residential membranes. It is a practical choice for compatible countertop systems where faster fill time matters and for under-sink systems that need higher production.
Under-sink RO
Higher Daily Demand
Suitable for compatible tank-based or tankless under-sink systems designed around a 150 GPD membrane and matching flow restrictor.
How it works
Thin-film composite membrane for dissolved-solids reduction
Reverse osmosis uses water pressure to move feed water across a semipermeable TFC membrane. The membrane helps reduce dissolved salts, minerals, metals, nitrate, fluoride, and other membrane-rejectable substances while purified water passes to the product-water side.
Dissolved Solids
Helps reduce overall TDS and dissolved mineral content.
Fluoride
Helps reduce fluoride ions under suitable operating conditions.
Nitrate / Nitrite
Helps reduce nitrate and nitrite in the feed water.
Selected Metals
Helps reduce dissolved metals such as lead, arsenic, mercury, chromium, and copper.
Dissolved Minerals
Helps reduce calcium, magnesium, sodium, and other dissolved salts.
Residential High-Output Format
Ships as a standard 2012-size residential membrane.
What 150 GPD means
Rated output is approximately 6.25 gallons per hour under ideal test conditions
GPD means gallons per day. A 150 GPD membrane is rated for approximately 6.25 gallons per hour if operated continuously under standardized test conditions. Actual household production is normally lower because water pressure, temperature, feed-water TDS, membrane condition, and system design vary.
150 gallons per day under standardized test conditions.
Typically lower than the rated value, especially with colder water, lower pressure, or higher source-water TDS.
GPD describes membrane production capacity, not guaranteed household output. The membrane, flow restrictor, pressure, temperature, and system configuration all affect actual production.
Compatibility
Confirm housing size and match the flow restrictor to 150 GPD
✓
2012 membrane format
The membrane ships in the 2012 format, approximately 2.0″ × 12″.
The membrane ships in the 2012 format, approximately 2.0″ × 12″.
✓
Compatible 1812/2012 housing
Use only in a membrane housing confirmed to accept the 2012 diameter; MyAquaFilter/MyWaterClub standard housings may accept both 1812 and 2012 formats.
Use only in a membrane housing confirmed to accept the 2012 diameter; MyAquaFilter/MyWaterClub standard housings may accept both 1812 and 2012 formats.
✓
150 GPD flow restrictor
The drain-side flow restrictor must be correctly matched to the 150 GPD membrane.
The drain-side flow restrictor must be correctly matched to the 150 GPD membrane.
✓
Proper prefiltration
Sediment and carbon prefilters should be maintained to help protect the membrane from particles and oxidants.
Sediment and carbon prefilters should be maintained to help protect the membrane from particles and oxidants.
Specifications
Verified product details
| Product type | High-output residential reverse-osmosis replacement membrane |
|---|---|
| Membrane type | Thin-film composite (TFC) |
| Application type | TW / tap-water residential RO |
| Rated capacity | 150 GPD |
| Physical membrane size | 2012 format |
| Nominal membrane dimensions | Approximately 2.0″ × 12″ |
| Compatible use | Compatible countertop and under-sink RO systems designed for a 150 GPD membrane |
| Typical service life | Approximately 2–3 years, depending on water quality, pressure, prefiltration, and measured rejection |
| Listed shipping dimensions | 12 × 2 × 2 in |
| MyAquaFilter listed weight | 9 oz |
| Brand | Aqua JB on MyAquaFilter listing |
| MyAquaFilter SKU | TW-2012-150 |
| MyWaterClub SKU | TW-2012-150 |
Before ordering
- ✓Confirm the system is designed for a 150 GPD membrane or is being correctly reconfigured for 150 GPD
- ✓Confirm the housing physically accepts a 2012 membrane
- ✓Confirm the drain-flow restrictor is matched to 150 GPD
- ✓Inspect or replace sediment and carbon prefilters before installing a new membrane
Maintenance
Replace based on age, production rate, and measured rejection
Approximately 2–3 years under normal residential conditions with proper prefiltration.
Consider replacement when purified-water production slows significantly or measured TDS rejection declines.
Installation
Protect the membrane and flush it before evaluating performance
1
Shut Off and Depressurize
Turn off the feed water and release system pressure before opening the membrane housing.
2
Install and Fully Seat
Insert the membrane according to the housing design and make sure the sealing end is fully seated.
3
Check Prefilters and Restrictor
Confirm that sediment and carbon prefilters are serviceable and that the flow restrictor matches the 150 GPD membrane.
4
Flush Before Use
Run and discard the initial product water after installation, then allow the system to stabilize before relying on TDS readings.
Before purchase
Good to know
!
150 GPD is a rated value
Actual household output is normally lower and depends strongly on feed pressure, temperature, and source-water TDS.
Actual household output is normally lower and depends strongly on feed pressure, temperature, and source-water TDS.
!
Higher GPD is not automatically a drop-in upgrade
A 150 GPD membrane may fit an existing housing, but the flow restrictor and overall system configuration must also match the higher capacity.
A 150 GPD membrane may fit an existing housing, but the flow restrictor and overall system configuration must also match the higher capacity.
!
2012 diameter should be confirmed
The MyWaterClub listing specifies a 2.0″ × 12″ 2012 membrane. Confirm that a third-party housing accepts this diameter before ordering.
The MyWaterClub listing specifies a 2.0″ × 12″ 2012 membrane. Confirm that a third-party housing accepts this diameter before ordering.
!
Chlorine protection is important
TFC membranes require effective carbon pretreatment to help protect the membrane from oxidant exposure.
TFC membranes require effective carbon pretreatment to help protect the membrane from oxidant exposure.
!
Reduction percentages are not fixed
Actual rejection varies with feed-water chemistry, pressure, temperature, membrane condition, and system design.
Actual rejection varies with feed-water chemistry, pressure, temperature, membrane condition, and system design.
!
Not a microbiological purifier
Do not use this membrane alone to make microbiologically unsafe or unknown-quality water safe to drink.
Do not use this membrane alone to make microbiologically unsafe or unknown-quality water safe to drink.
Reduction performance and membrane life depend on source-water chemistry, pressure, temperature, prefiltration, membrane condition, flow-restrictor selection, and system maintenance. This product is not represented as a certified microbiological purifier.
Not sure whether 150 GPD is the correct replacement?
Send the existing membrane label, RO system model, source-water TDS, water pressure, and a photo of the membrane housing and flow restrictor.
Send the existing membrane label, RO system model, source-water TDS, water pressure, and a photo of the membrane housing and flow restrictor.
Additional information
| Weight | 9 oz |
|---|---|
| Dimensions | 12 × 2 × 2 in |
1 review for 150 GPD RO Reverse Osmosis Membrane — 2012 TFC/TW Type for Countertop & Under-Sink Systems — SKU TW-2012-150
Add a review
Related Products
Featured Products
Premium 6-Stage Countertop Reverse Osmosis System — 150 GPD, Softening, KDF-55/T33 & Alkaline Mineral Post-Filters — SKU 006-BP
Price range: $149.00 through $159.00
Best Selling Products
5-Stage UltraPure Countertop Reverse Osmosis System with DI Post-Filter — 75 or 150 GPD — SKU 002-UB12
Price range: $119.00 through $149.00
Monica E. –
Got 5 ppm. Wow!