Primary purpose
Enhanced Chemical Adsorption
Helps reduce chlorine, chlorine-related taste and odor, many common VOCs and selected organic contaminants within the cartridge’s rated operating conditions.
Premium Activated Coconut Carbon Block Filter Cartridge, 10″ × 2.5″, 10 Micron — Chlorine, VOC, Taste & Odor Reduction, SKU: CBCO-10
$8.95
- Description
- Additional information
- Reviews (0)
Description
Premium coconut carbon filtration
10-micron activated coconut-shell carbon block for enhanced taste-and-odor polishing
This premium 10″ × 2.5″ drop-in cartridge uses activated coconut-shell carbon for higher adsorption efficiency, clean-tasting water and dependable chemical filtration in compatible whole-house, under-sink and reverse-osmosis systems.
10 micronNominal filtration rating
10″ × 2.5″Standard slim format
Coconut carbonPremium activated media
6–12 monthsTypical service life
What it does
Provides premium carbon polishing for chlorine-related taste and odor
The dense carbon-block structure increases contact time compared with loose granular carbon and helps improve adsorption of chlorine and many common organic compounds.
Typical placement
Final Carbon or Polishing Stage
Commonly installed after sediment or catalytic-carbon filtration, or as a pre- or post-carbon stage in compatible reverse-osmosis systems.
Key benefits
Premium adsorption, standard sizing and straightforward replacement
Activated coconut-shell carbon
Premium renewable carbon media supports efficient adsorption and clean-tasting water.
10-micron nominal rating
Combines chemical adsorption with limited fine-particle filtration.
Dense carbon-block structure
Provides longer water contact time than loose granular carbon media.
RO-system compatible
May be used as a pre- or post-carbon stage in compatible reverse-osmosis systems.
Whole-house compatible
May be used as a polishing stage in compatible whole-house systems with slim housings.
Drop-in installation
Fits compatible standard 10″ × 2.5″ filter housings.
Reduction guide
What this cartridge helps reduce
Actual performance depends on source-water chemistry, pressure, flow rate, contact time and cartridge condition.
Helps reduce
Chlorine
Chlorine-related taste
Unpleasant odor
Many common VOCs
Selected organic compounds
Fine suspended particles
Chlorine-related taste
Unpleasant odor
Many common VOCs
Selected organic compounds
Fine suspended particles
Reduction performance varies by water quality, flow rate, contact time and cartridge life.
Not designed to remove without specialty treatment
Hardness minerals
Dissolved iron
Fluoride
Chloramine
Bacteria or unsafe water
Dissolved salts / TDS
Dissolved iron
Fluoride
Chloramine
Bacteria or unsafe water
Dissolved salts / TDS
Chloramine generally requires catalytic carbon. Hardness usually requires a softener, and microbiological concerns require appropriate disinfection.
Specifications
Filter dimensions, operating range and service guidance
| Product type | Premium activated coconut-shell carbon-block filter cartridge |
|---|---|
| Primary purpose | Enhanced chlorine-related taste and odor polishing |
| Filter media | Activated coconut-shell carbon |
| Nominal rating | 10 micron |
| Cartridge dimensions | 10″ × 2.5″ nominal; approximately 9 7/8″ × 2.5″ actual |
| Housing compatibility | Compatible standard 10″ × 2.5″ slim housings |
| Operating pressure | Up to 100 PSI at cartridge level; follow the lower limit of the installed housing or system |
| Operating temperature | 36–100°F; cold water only |
| Typical service life | Approximately 6–12 months, depending on water quality and use |
| SKU | CBCO-10 |
Installation and maintenance
- ✓Shut off the water supply and relieve housing pressure before opening
- ✓Install only in a compatible 10″ × 2.5″ slim housing
- ✓Place after sediment filtration whenever possible
- ✓Inspect, clean and lubricate the housing O-ring as required
- ✓Pressurize slowly and inspect the housing for leaks
- ✓Flush until carbon fines are cleared before normal use
Compatibility
Compatible filtration applications
Confirm housing size, stage order and flow requirements before purchase.
3F
Premium 3-Stage Replacement Set
This premium coconut carbon block may be used as the final stage in compatible sediment + carbon + polishing setups.
2F
Premium Dual-Stage Replacement Set
Pairs with a sediment cartridge in compatible two-stage whole-house systems.
RO
Reverse-Osmosis Carbon Stage
May be used as a compatible pre- or post-carbon stage in selected RO systems.
WH
Whole-House Polishing Stage
May be used in compatible slim-housing whole-house systems when premium taste-and-odor polishing is desired.
Before purchase
Good to know
!
Confirm cartridge size
This filter fits standard 10″ × 2.5″ slim housings and does not fit 10″ × 4.5″ Big Blue housings.
This filter fits standard 10″ × 2.5″ slim housings and does not fit 10″ × 4.5″ Big Blue housings.
!
This is the premium coconut-carbon version
It is distinct from the standard CTO carbon block used in lower-cost replacement sets.
It is distinct from the standard CTO carbon block used in lower-cost replacement sets.
!
Use sediment filtration first
Installing sediment filtration upstream can help extend carbon-block life and reduce premature clogging.
Installing sediment filtration upstream can help extend carbon-block life and reduce premature clogging.
!
Check whether your city uses chloramine
This cartridge is intended primarily for chlorine-related taste and odor. Chloramine generally requires catalytic carbon.
This cartridge is intended primarily for chlorine-related taste and odor. Chloramine generally requires catalytic carbon.
!
Service life is not a fixed guarantee
High chlorine levels, high flow, heavy use or poor prefiltration may shorten cartridge life.
High chlorine levels, high flow, heavy use or poor prefiltration may shorten cartridge life.
!
Flush before normal use
Initial dark water may be caused by harmless carbon fines. Flush until the water runs clear.
Initial dark water may be caused by harmless carbon fines. Flush until the water runs clear.
This product includes one replacement cartridge only. Filter housing, wrench, mounting bracket, plumbing fittings and additional filters are not included. It is not intended to make microbiologically unsafe or unknown-quality water safe to drink.
Not sure whether this premium coconut carbon block fits your system?
Send the system model number or a photo of the existing cartridge and housing.
Send the system model number or a photo of the existing cartridge and housing.
Additional information
| Weight | 14 oz |
|---|---|
| Dimensions | 10 × 3 × 3 in |
Be the first to review “Premium Activated Coconut Carbon Block Filter Cartridge, 10″ × 2.5″, 10 Micron — Chlorine, VOC, Taste & Odor Reduction, SKU: CBCO-10”
Related Products
Featured Products
Antibacterial 5-stage Countertop Reverse Osmosis Water Purification System (good for travel or not frequent use), 75/150 GPD membrane
Price range: $169.00 through $299.00
4-stage Countertop Reverse Osmosis Water Purification System for Aquariums, 75 or 150 GPD RO Membrane
Price range: $119.00 through $209.00
Reviews
There are no reviews yet.