1/8″ Thread × 1/4″ OD Quick-Connect Elbow Fitting – Connects Standard RO Membrane Housing to 1/4″ OD Tubing, 4pcs, SKU# FT-EL-18-QC14

Description

1/8″ Thread × 1/4″ OD Quick-Connect Elbow Fitting

This Quick-Connect Elbow Fitting is designed to connect a standard RO membrane housing port
(1/8″ threaded connection) to 1/4″ OD tubing. The 90-degree elbow shape helps create a clean, compact tubing
route in tight spaces under the sink or inside RO system setups.

Purpose

•  Connects standard RO membrane / membrane housing ports to 1/4″ OD tubing
•  Creates a 90° tubing turn to reduce bending and improve routing in tight areas
•  Ideal for RO systems, countertop RO units, and water filtration applications using 1/4″ tubing

Key Features

•  Quick-connect (push-to-connect) design for fast installation
•  Compact 90° elbow shape for clean tubing management
•  Helps reduce kinks and strain on tubing compared to sharp bends
•  Compatible with most standard 1/4″ OD RO tubing

Installation Tips

☑  Use thread seal or plumbing tape (important!)
☑  Push tubing firmly into the fitting until it seats fully (you should feel it stop).
☑  Thread the 1/8″ side into the port by hand first, then tighten as needed (do not overtighten).
☑  Ensure tubing is cut straight and clean before inserting into the quick-connect end.

Specifications

Connection Type: 1/8″ Thread × 1/4″ OD Quick-Connect (Elbow)

Tubing Size: 1/4″ OD (Outside Diameter)

Shape: 90° Elbow

Application: Reverse Osmosis (RO) and water filtration tubing connections